Sorry ...I could not help anymore...I am bit not the best...thought I could
help I can look and see if there is anything on the archive also

Adrian Padilla
http://www.majesticsoundsonline.com
http://www.a1-audio.com
http://www.publicwi-fi.us

 -----Original Message-----
From: 	Chris Buechler [mailto:cbuechler at gmail dot com]
Sent:	Monday, October 04, 2004 12:19 PM
To:	Ziekke
Cc:	m0n0wall at lists dot m0n0 dot ch
Subject:	Re: [m0n0wall] Only allowing certain MAC to use IP?

On Mon,  4 Oct 2004 11:57:53 -0400, Ziekke <ziekke at ziekke dot net> wrote:
> I appreciate your response, but I dont think it was quite what I was
looking
> for.
>
> What I want to do is have my DHCP server open to anyone who wishes to use
it (it
> is a wireless interface), but specify a range IP address that is only
usable by
> certain MAC IDs.
>
> I do not wish to deny unknown clients from my DHCP server, I want to deny
> everyone but a specific MAC access to an IP address.
>

It's not possible in the webGUI, but you can use static ARP in a
<shellcmd> parameter in your config.xml.  (google 'shellcmd
site:m0n0.ch' to find info on using that)

Syntax is:
 arp -s 10.1.1.3 00:60:97:B9:3B:B5
to assign that MAC address to IP 10.1.1.3.

You can put that in on a temporary basis to test using /exec.php on
your m0n0wall.  This setting will be lost at reboot unless you put it
in config.xml.

But that's easy to get around if you know what you're doing by
changing the MAC address on your NIC to the permitted one.  Many
Windows drivers have this built into the NIC GUI.  And the MAC address
of another system on the LAN is easy to come by (ping IP, run 'arp
-a').

-Chris

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch